Volvo 2009 C30 Owner's Manual download pdf (Page 67)

02 Instruments and controls

Trip computer

02

``

67

G029052

READ (press to acknowledge/confirm/

erase a message)

Thumb wheel (used to scroll among the trip

computer menus)

RESET

The trip computer stores information gathered

from several systems in your car and has four

menus (five on Canadian models) that can be

shown in the information display.

•

MILES TO EMPTY TANK

•

AVERAGE (average fuel consumption)

•

INSTANTANEOUS (current fuel con-

sumption)

•

AVERAGE SPEED

•

ACTUAL SPEED (current speed in mph,

Canadian models only)

•

DSTC, see page 151

NOTE

Warning messages from the car's monitor-

ing systems will override the trip computer

function.

If a warning message is shown in the informa-

tion display while you are using the trip com-

puter:

1. Acknowledge the message by pressing the

READ (button 1).

2.

Press READ again to return to the trip

computer function.

Controls

The trip computer functions can be accessed

by twisting the thumb wheel (2) one step at a

time in either direction. Twisting a final time

returns you to the original function.

Resetting

AVERAGE (average fuel consumption) and

AVERAGE SPEED can be reset.

1. Select one of these functions.

2.

Press RESET (3).

MILES TO EMPTY TANK

This function shows the approximate distance

that can be driven on the fuel remaining in the

tank. The calculation is based on average fuel

consumption during the last 20 miles (30 km)

of driving and the amount of fuel remaining in

the tank when the reading was taken.

When the message

---- miles to empty tank

appears in the display, refuel as soon as pos-

sible.

AVERAGE

This value indicates fuel consumption since the

last time the trip computer was reset, by press-

ing RESET (button 3). When the engine is

switched off, information on fuel consumption

is stored and remains in system memory until

RESET (button 3) is pressed again.

INSTANTANEOUS

This value indicates the current fuel consump-

tion, based on readings taken once per sec-

ond. When the car is not moving, "----" will be

displayed.

AVERAGE SPEED

This value indicates average speed since the

last time the trip computer was reset, by press-

ing RESET (button 3). When the engine is

switched off, information on average speed is

stored and remains in system memory until the

RESET (button 3) is pressed again.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 273 274

Comments to this Manuals

No comments