Volvo 2009 C30 Owner's Manual download pdf (Page 124)

05 Locks and alarm

Keyless drive (option as available)

05

124

Locking or unlocking the vehicle with the

key blade

G020225

Keyless drive keyhole cover

The driver's door on vehicles equipped with

keyless drive can be locked or unlocked with

the remote control's detachable key blade if

necessary, see page 120 for information on

removing the key blade from the remote con-

trol. To access the keyhole in the driver's door:

•

Pry off the keyhole cover by inserting the

key blade or a small screwdriver in the hole

on the underside of the cover (indicated by

the arrow in the inset illustration).

•

Insert the key blade as far as possible in the

driver's door lock. Turn the key blade

clockwise approximately one-quarter turn

to unlock the driver's door only. This will

trigger the alarm.

•

To disable the alarm: Press the Unlock

button on the keyless drive remote control.

If the batteries in the remote are weak,

remove the keyless drive start control from

the ignition switch by pressing the catch

(see the illustration on page 144) and pull-

ing the control out of the ignition switch.

Insert the ignition key section of a keyless

drive remote control in the ignition switch.

Keyless drive remote control and driver's

seat memory

This function is only available on vehicles

equipped with the optional power driver's seat.

•

When you leave the car with a keyless drive

remote control in your possession and lock

any door, the position of the driver's seat

will be stored in the seat's memory.

•

The next time a door is opened by a person

with the same remote control in his/her

possession, the driver's seat will automat-

ically move to the position that it was in

when the door was most recently locked.

NOTE

If several people carrying keyless drive

remote controls approach the vehicle at the

same time, the driver's seat will assume the

position it was in for the person who opens

a door first.

Keyless drive information messages

If anyone leaves the vehicle with the only key-

less drive remote control in his or her posses-

sion while the ignition is switched on, a

message will be shown in the information dis-

play and an audible signal will sound.

NOTE

This message will only be displayed if the

start control is in position I or II.

The message will be erased from the display

and the audible signal will stop when the

remote control has been returned to the vehicle

and one of the following has occurred:

•

A door has been opened and closed

•

The start control has been turned to posi-

tion 0

•

The READ button (see page 60 for the

location of this button) has been pressed.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 273 274

Comments to this Manuals

No comments