Volvo 2003 V70 Operations Instructions download pdf (Page 240)

2003 VOLVO V70

security system, etc.

Your original hand-held transmitters may, of course, be used at any time.

Erasing programmed buttons

Individual buttons cannot be erased. To erase all three programmed buttons:

1. Turn the ignition key to the "accessory" position (II).

2. Hold down the two outside buttons on the HomeLink® Universal Transceiver for about 20 seconds,

until HomeLink®'s indicator light begins to flash.

3. Release both buttons.

The HomeLink® buttons can be reprogrammed using the procedures described on the previous page.

(HomeLink® information continues on the next page)

pg. 169 HomeLink® Universal Transceiver (option)

Reprogramming a single HomeLink® button

1. Press and hold the desired HomeLink® button. Do not release the button until step 3 has been

completed.

2. When the indicator light begins to flash slowly (after approximately 20 seconds), position your hand-

held transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink® surface.

3. Press and hold the hand-held transmitter button. The HomeLink® indicator light will flash first

slowly, then rapidly. When the indicator light flashes rapidly, release both buttons.

The previously programmed device has now been erased and the new device can be activated by

pressing the HomeLink® button that has just been programmed. This procedure will not affect any other

programmed HomeLink® buttons.

NOTE:

● Retain the original transmitter(s) for future programming procedures (e.g., if you purchase a new car).

● For your own security, erase all programmed buttons on the HomeLink® Universal Transceiver when

you sell your car.

● Metallic sun protection films should not be used on any windows in a car equipped with HomeLink®

file:///K|/ownersdocs/2003/2003_V70/03v70_11.htm (4 of 5)12/30/2006 4:17:07 PM

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 256 257

No comments

Volvo 2003 V70 Operations Instructions Page 240