Replacement of rear turn signal and brake light bulbs
● Switch off all lights and turn the ignition switch to position 0.
● Using a screwdriver, carefully pry off the speaker grille.
● Pull out the red tab in the speaker.
● Then press on the black pin above the extracted red tab and twist out the speaker.
● Twist the bulb holder counter-clockwise, and withdraw it.
● Fit a new bulb.
● Fit the bulb holder in place and twist it clockwise.
● Refit the speaker and press in the red tab.
● Press the speaker grille back into position.
pg. 123 Replacing bulbs
file:///K|/ownersdocs/2003/2003_V70/03v70_08a.htm (12 of 21)12/30/2006 4:17:02 PM
Comments to this Manuals