To remove and install a high beam bulb (HB3):
● Switch off all lights and turn the ignition switch to position 0.
● Open the hood.
● Remove the cover by twisting it counterclockwise.
● Twist the bulb holder counterclockwise, pull it out and fit a new bulb. Note its position.
● Refit the bulb holder. It can only be fitted in one way.
● Screw the cover back on. The word TOP should be upwards.
Replacement of front parking light bulb
● Switch off all lights and turn ignition key to position 0.
● Remove the low beam cover by twisting counterclockwise.
● Pull out the bulb and its socket. Replace bulb.
● Press the bulb and its socket back into place.
● Check that the new bulb lights.
● Screw the cover back into place, "TOP" should be upwards!
file:///K|/ownersdocs/2003/2003_V70/03v70_08a.htm (10 of 21)12/30/2006 4:17:02 PM
Comments to this Manuals