Volvo XC90 2007 Owner's Manual download pdf (Page 57)

56

Instruments and controls

Trip computer

Controls

To access the trip computer information, you

must turn the ring (B) in steps, either forward

or backward. By turning again, you return to

the starting point.

NOTE! If a warning message interrupts while

you are using the trip computer, you must first

acknowledge the message by pressing the

READ button (A) to return to the trip

computer.

Functions

The trip computer displays the following

information:

• AVERAGE SPEED

• SPEED IN MILES PER HOUR

1

• CURRENT FUEL CONSUMPTION

• AVERAGE FUEL CONSUMPTION

• RANGE TO EMPTY FUEL TANK

Average speed

The average speed since the last reset

(RESET). When the ignition is switched off,

the average speed is stored and used as the

basis of the new value when you continue

driving. This can be reset with the RESET

button (C) on the lever.

Speed in miles per hour

1

Current speed is displayed in mph.

Current fuel consumption

Continuous information on current fuel

consumption, calculated each second. The

figure in the display is updated every couple

of seconds. When the car is stationary, "----"

is shown on the display.

NOTE! There may be a slight error in the

reading if a fuel-driven heater is used.

Average fuel consumption

The average fuel consumption since the last

reset (RESET). The average fuel

consumption is stored when the ignition is

switched off and remains until reset with the

RESET button (C) on the lever.

NOTE! There may be a slight error in the

reading if a fuel-driven heater is used.

Range to empty fuel tank

The range to empty is calculated based on

the average fuel consumption over the last

30 km. When the range to empty is shorter

than 20 km then "----" is shown on the

display.

NOTE! There may be a slight error in the

reading if fuel consumption is changed due to

a change in driving style or if a fuel-driven

heater is used for example.

1. Certain countries

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 253 254

Comments to this Manuals

No comments