Installation
● Take the cable harness and foam tape out of the kit. Remove the protective tape.
Installation
● Wrap the foam tape around the fuse holder to prevent rattling.
Installation
● Take hold of the long cable harness. Route the end with the small connector on
the right-hand side in the center console, up and out through the hole for the
loudspeaker grille/console loudspeaker grille.
Note!
The cable harness is always routed on the right-hand side in the tunnel console and the
center console up to the hole for the loudspeaker grille, on both right and left-hand drive
cars.
Installation
● Take out the unit with the climate panel and connect connector (1) removed from
the 12V outlet on the female connector (2) on the routed cable.
● Connect the remaining connector to the 12V outlet.
Installation instructions, accessories
-
Navigation system portable
Volvo Car Corporation G
öteborg, Sweden
Installation instructions, accessories
-
Navigation system portable
Volvo Car Corporation G
öteborg, Sweden
©
VolvoCar Corporation, 2007 Printed in Sweden
©
VolvoCar Corporation, 2007 Printed in Sweden
Page 12 of 15
Comments to this Manuals