09 Maintenance and service
Replacing bulbs
09
``
211
Bulb replacement
G027077
1. Switch off all lights and turn the ignition key
to position 0.
2. Lower the bottom of the tailgate and open
the floor hatch. (If the car is equipped with
a grocery bag holder (option), undo the
holder's retaining straps.)
3. Remove the corner piece.
4. Open the hatch in the side panel by pulling
the catch up and towards you.
5. Take spanner no. 10 out of the tool kit and
undo the nuts.
6. Pull the entire insert straight back.
7. Loosen the extra length of cable for better
accessibility.
8. Place the insert on a soft surface so as not
to scratch the glass.
9. Turn the bulb holder anticlockwise and pull
it out.
10. Turn the bulb anticlockwise to loosen it.
(Applies to direction indicators, reversing
lamps and brake lamps).
11. Pull the bulb straight out. (Applies to posi-
tion lamps).
12. Replace the bulb.
13. Refit the bulb holder in the recess and turn
clockwise.
14. Press back the extra length of cable.
15. Refit the insert against the bolt holes. Press
the insert into place.
16. Tighten the nuts.
17. Refit the side panel and corner piece.
Comments to this Manuals