When the primer surface is dry, the paint can be applied using a brush.
Mix the paint thoroughly, apply several thin paint coats and let dry after each application.
pg. 71 Paint touch-up
3 If there is a longer scratch, you may want to mask to protect surrounding paint.
Touching-up flaking fender edges and sills
Material:
Rust remover
Primer - spray
Surface finish - spray
Sand paper (H 150 - 300 grit)
Thinner
Note: When touching-up the car, it should be well cleaned and dry and have a temperature exceeding
+15° C (60° F).
NOTICE! Spray paint may contain saturated chlorofluorocarbon propellant, sale of which may be
illegal in certain areas.
Mask with tape and paper prior to painting larger surfaces. Remove the masking immediately after
application of the last paint coat, before the paint starts to dry.
file:///K|/ownersdocs/1978/1978_264_265/78264265_03c.htm (4 of 12)12/22/2006 10:12:13 PM
Comments to this Manuals