Volvo 265 Specifications download pdf (Page 77)

1978 Volvo 264 265

Be sure the arm goes all the way into the attachment.

Raise up the side of the car enough to lift the wheel off the ground.

Unscrew the wheel nuts completely and remove the wheel carefully so as not to damage the threads of

the studs.

Installation

● Clean the nuts and the contact surface between wheel and hub.

● Lift on the wheel and fit the wheel center on the hub shoulder.

● Tighten the nuts until the wheel makes good contact with the flange.

● Lower the car and tighten the nuts alternately to 72-100 ft. lbs.

● Fit the wheel cap.

NOTE: Do not rotate a raised rear wheel if the car is equipped with a limited slip differential. This

will also move the opposite wheel on the ground and the car may slide off the jack.

Contents | Top of Page

file:///K|/ownersdocs/1978/1978_264_265/78264265_03b.htm (14 of 14)12/22/2006 10:12:12 PM

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 103 104

No comments

Volvo 265 Specifications Page 77