Volvo 265 Specifications download pdf (Page 68)

1978 Volvo 264 265

No. Lubricating point Lubricant

1 Hood lock Paraffin wax

2 Hood hinges Oil

3 Sun-roof wind deflector Oil

4 Door lock outer sliding surfaces Paraffin wax

5 Striker plate Paraffin wax

6 Trunk lid hinges Oil

7 Door hinges Grease

8 Front seat slide rails and latch devices Oil

9 Window regulator

Locking device (Accessible after door upholstery panels removed)

Oil, grease

Silicon grease

10 Key holes Lock oil

11 Trunk lid lock Lock oil

pg. 59 Coolant

Check coolant level

The cooling system must be filled with coolant and not leak to operate at maximum efficiency. Check

the coolant level when filling fuel. The level should be between the "Max" and "Min" marks on the

expansion tank. The check should be made with particular thoroughness when the engine is new or the

cooling system has been drained.

Do not remove the filler cap other than for topping-up with coolant. Frequent removal may prevent

coolant circulation between the engine and the expansion tank during engine warming up and cooling.

Top up with coolant

Top up with coolant by filling the expansion tank when level is at the "Min" mark. Use a mixture of 50

percent anti-freeze/summer coolant and 50 percent water all the year round. Top up to the "Max" mark.

file:///K|/ownersdocs/1978/1978_264_265/78264265_03b.htm (5 of 14)12/22/2006 10:12:12 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 103 104

No comments

Volvo 265 Specifications Page 68