Volvo 2009 C70 User Manual download pdf (Page 218)

09 Maintenance and servicing

Replacing bulbs

09

218

6. Lift out the headlight housing and place it

on a soft surface to avoid scratching the

lens.

CAUTION

When disconnecting the connector, pull on

the connector itself and not on the wiring.

After the defective bulb has been replaced,

reinsert the housing in the reverse order. Check

that the retaining pin is correctly inserted.

WARNING

Bi-Xenon headlights (option) – due to the

high voltage used by these headlights,

these bulbs should only be replaced by a

trained and qualified Volvo service techni-

cian.

Low beam bulb

Cover with retaining clamps

1. Open the hood and remove the headlight

housing (see page 217 for instructions).

2. Release the retaining clamps on the cover.

3. Release the bulb's retaining spring holding

the bulb in place by pressing it first to the

left and then moving it outward and down-

ward.

4.

Pull out the bulb.

Low beam bulb

Installing a new bulb

1. Insert the new bulb. It can only be installed

in one position.

2. Press the retaining spring inward and

upward and slightly to the right until it

snaps into place.

3.

Press the wiring connector onto the bulb.

4. Put the plastic cover in place.

5. Press the retaining clamps back into place.

6. Reinstall the headlight housing (see

page 217).

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 277 278

Comments to this Manuals

No comments