Volvo D 20 Operator's Manual download pdf (Page 53)

Maintenance: S drive and reverse gear

Propeller shaft seal. Reverse gear

If the boat has a Volvo Penta shaft the shaft seal

must be vented and lubricated directly after launching.

Vent the bushing by pressing it together while press-

ing down on the shaft until water appears. Then press

in approx. 1 cc water repellent grease into the seal.

IMPORTANT! The seal must be replaced every

500 running hours or every 5th year.

Rubber seal. S-drive

Check the rubber seal between the drive and the hull

regularly for cracks and wear.

WARNING! The seal must be changed every

seven years or earlier if it is defective. This work

should be carried out by an authorized workshop.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

No comments

Volvo D 20 Operator's Manual Page 53