Volvo 2006 C70 User Manual download pdf (Page 64)

position.

pg. 68 Interior

Power seats

The power driver's seat can be adjusted:

If the ignition key is in position I or II.

During a 10 minute period after the doors have been unlocked if the door remains open.

If the door is closed and the ignition key is not yet in the ignition, or if the key is in position 0, the seat can be

adjusted or during a period of 40 seconds. The power passenger's seat can only be adjusted if the ignition key is in

position I or II, or if the engine is running.

Adjusting the seat

Controls 5, 6, and 7 on the side of the seat can be used to make adjustments.

5. Backrest tilt

6. Move this section of the control up or down to raise/lower the rear section of the seat. Move the control forward to

move the seat forward.

7. Move this section of the control up or down to raise/lower the front section of the seat. Move the control rearward

to move the seat rearward.

NOTE: The power seats have an overload protector that activates if a seat is blocked by any object. If this occurs,

switch off the ignition (key in position 0) and wait for approximately 20 seconds before operating the seat again.

Emergency stop

NOTE: If the seat inadvertently begins to move, press any of the buttons to stop the seat.

Programming the seat memory, driver's seat only (option)

Three different seating positions can be stored (buttons 1, 2, and 3 in the illustration) in the seat's memory.

The following example explains how button 1 can be programmed. Buttons 2 and 3 can be programmed in the same

way.

To program (store) a seat position in button 1:

Use controls 5, 6, and 7 to adjust the seat to the desired position.

Press and hold down the M (memory) button.

With the M button depressed, press button 1 to store the seat's current position.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 181 182

No comments

Volvo 2006 C70 User Manual Page 64